DIY section
The easier things to make
Stuff to do yourself:
• Free energy machine: (I have not tested it myself)

• A tin foil hat lined with straw will prevent any and all emfs
from entering or leaving your brain:
Where to get tin foil (Sn)
• Fluoride can be removed by putting a leaf of basil per 100ml of water (around 2-3 for a cup) for 20mins.
Or by getting a water filter with fluoride removal.
Link to a good one
• To (possibly) remove all content of vaccines when its in your blood,
just take as much activated carbon pills in grams as the amount in grams of the weight of the vaccine
you took.
(around 3-4 pills most of the time, maayyybe 5 if its a big injection)
Disclaimer: I do not know if there are side effects to using negative electricity for too long.
• How to cure a cold with negative electricity, before it develops:
1.
Buy a 9v battery.
2.
Touch the negative side of the battery.
3.
Touch the positive side to the ground for better electricity flow.
(Tip: wet and salt your finger for better electricity flow)
(Be careful with high amps and volts you might really get a shock)
• How to make a nanobot-resonance destroyer: (V1)
Items you will need:
- A rocker switch or button.
- One double A battery.
- A piece of plastic to attach to the motor axle.
(that sticks out to one side)
- Some electrical tape. (or duct tape)
- A small 1.5-3v motor.
- (Optional) Battery case/holder.
- (Optional, but recommended) A small carboard box to house everything.
Images coming soon!
Step 1. Connect the positive terminal or motor to battery.
(and use some electrical tape to hold the connection together)
Step 2. Connect the negative terminal of motor to the switch or button.
Step 3. Connect other side of switch (or button) to negative side of battery.
(and apply electrical tape aswell)
Step 4. Now you're done!
How to use:
Step 1. Attach motor to thing you want to sterlize of nanobots.
Step 2. With two fingers, flip switch (or push button) every 300 miliseconds.
(in other words 3 times per second more or less)
Step 3. Do this for around 15-30s, depending on how big item is.
How it works:
- The motor creates a similar vibration to that of the graphene oxide's very own.
- This makes the graphene absorb the energy from the vibration, and once it's too much it falls apart.
- I got the right wavelength from the fact that the nanobots are able to be seen by ultraviolet light.
(Which is from 10nm to 380nm) I just picked 300nm for simplicity.
- Now i might be wrong about that, so keep in mind that results may be caused by placebo.
(will buy microscope to be able to make sure that the nanbots indeed die, but in any case im pretty sure it should work)
How to make a cheese powered magnet:
A cheese powered magnet, is one that has cheese connected to both poles via some copper wires.
• See if you can figure out why cheese is used, i'm not telling you.
• Btw, i recommend a horshoe magnet for this, it'll aim the healing beam in one direction.
• Also, if you feel anything weird while using the magnet, please discontinue use immediately!
• Update: No spirits were messing with the magnet i used, it was something else.
TLDR: So long as you don't get tricked into thinking the magnet is dangerous, you're fine.
You're welcome!
How to make Anti-nanobot bucket:
(Designed by Tony Pantalleresco)
(Also, put feet in bucket for 20-30 minutes per use)
Image: (Click open image in new tab for full resolution)
Or above video: (Direct link to video)
Also, here's a link to a post made about the bucket on another website (Link)
Tip: click "name" then "id rather post as guest" to comment as guest.
|